DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor engine misfire	Poor connector connection Valve timing Fuel pressure system Contamination fuel Leakage air Ignition system Injector Bad quality fuel
Enable Conditions	Engine speed is between 550 and 6500RPM Engine torque is higher than zero torque Time after engine start is higher than 0s ECT is higher than 21 °C (69.8°F) or higher than -7.5°C (18.5°F) in that ECT at start is lower than -7°C (19.4°F) at engine start No rough road detection (Wheel speed (30 and 40m/s2) in rough road) Fuel system status is no fuel cut-off TPS error is not detected CKPS error is not detected
Threshold Value	Misfire
Diagnostic Time	2 driving cycles