System Inspection

Inspection Procedure 

• Engine oil check
  1. Check the amount of engine oil.
  2. Check if the engine oil is contaminated.
  3. Check the oil filter for blockages or contamination.
• Coolant check
  1. Check for specified coolant.
  2. Check engine coolant for contamination.
  3. Check the engine coolant reservoir and cap for damage.
  4. Check engine coolant lines for blockage.

     Good 

     • Go to "Wiring Inspection " procedure.

     No Good 

     • Repair as necessary and Go to "VERIFICATION OF REPAIR " procedure.