DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy	Case1	Signal abnormal - adaptation duration	Poor connector connection Faulty ITM control circuit Faulty ITM
	Case2	Signal abnormal - bottom limit adaptation
	Case3	Signal abnormal - top limit adaptation
	Case4	Monitoring deference between predicted position and actual position
Enable Conditions	Case1	Rotary coolant valve bottom limit adaptation active Rotary coolant valve top limit adaptation active
	Case2	Rotary coolant valve bottom limit adaptation active
	Case3	Rotary coolant valve top limit adaptation active
	Case4	Ignition "ON" Rotary coolant valve adaptation finished
Threshold Value	Case1	Rotary coolant valve adaptation time is more than 10s
	Case2	Rotary coolant valve bottom limit position is between 23 and 38.5 degree
	Case3	Rotary coolant valve top limit position is between 353 and 369 degree
	Case4	Difference between ITM predicted position and actual position is more than 25 to 50 degree
Diagnostic Time	Case1	0.01s
	Case2	0.01s
	Case3	0.01s
	Case4	1s
MIL ON Condition		2 driving cycle