DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy	Case1	Stuck check, Duty	Poor connector connection Faulty ITM control circuit Faulty ITM
	Case2	Target error check
	Case3	Check the voltage
Enable Conditions	Case1	No DTC related ITM (U063F00, P2B5800, P2B5900, P2B6000, P00B700) ITM valve position is between 0° and 225° Actual ITM valve position is less than 1.5° that it stays for 100ms
	Case2	ITM valve position is between 0° and 265° Actual ITM valve position is less than 1.5° that it stays for 100ms ITM motor duty is more than 0%
	Case3	No DTC related ITM (U063F00, P2B5800, P2B5900, P2B6000, P00B700) Active ITM
Threshold Value	Case1	When duty is more than 40%
	Case2	When how large of difference between target ITM position and actual ITM position is more than 8°
	Case3	When ITM motor output voltage is higher than specified voltage
Diagnostic Time	Case1	5s
	Case2	20s
	Case3	20s
MIL ON Condition		2 driving cycles