LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2021 >> K5 EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Brake System) >> Master Cylinder >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2024 Kia K5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    NOTE:
    • Before installing the pin, apply the grease to the joint pin.
    • Use a new snap pin whenever installing.
  2. After installation, bleed the brake system.

    (Refer to " 1st Air Bleeding (Normal Brake System)  ") 

  3. Check the brake oil leakage and pedal operating condition.
scientia non olet · About LEMON Manuals