Throttle Position Sensor (TPS)
WARNING: This page is about a different variant/trim than selected.
- Connect the KDS on the Data Link Connector (DLC).
- Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
[TPS1]
| Item | Opening Percentage (%) | Output Voltage (V) [Vref = 5V] |
|---|---|---|
| C.T | 7 - 13 | 0.35 - 0.65 |
| W.O.T | 88.6 - 94 | 4.43 - 4.70 |
[TPS2]
| Item | Opening Percentage (%) | Output Voltage (V) [Vref = 5V] |
|---|---|---|
| C.T | 87 - 93 | 4.35 - 4.65 |
| W.O.T | 6 - 11.4 | 0.3 - 0.57 |