Repair Procedures: Removal
WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
- Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
- Disconnect the boost pressure sensor connector (A).
- Remove the mounting bolt (B), and then remove the sensor from the intercooler outlet pipe.
Boost pressure sensor mounting bolt :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)