LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Stinger GT2, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Audio System) >> External AMP >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the external amplifier after connecting the connectors.
  2. Install the luggage side trim [RH].
  3. Connect the negative (-) battery terminal.
    NOTE:
    • Make sure that the external amplifier connectors are plugged in properly.
    • Check the AVN system for normal operation.
scientia non olet · About LEMON Manuals