LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Control System - 3.3L) >> Injector >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - " RELEASE RESIDUAL PRESSURE IN FUEL LINE  ") 

  2. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  3. Remove the delivery pipe & injector assembly.

    (Refer to Fuel Delivery System - " DELIVERY PIPE  ") 

  4. Remove the injector from the delivery pipe after disconnect the connector (A).
    G12803545Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals