Shift Lock Solenoid
- Remove the key interlock switch (B) after removing the switch cover (A).
- Remove the shift lock solenoid (A).
- Remove the manual mode switch housing (A).
- Remove the main connector (A).
- Remove the pin fixing bracket (A) from the main connector.
- Remove the pin of shift lock solenoid from the main connector.NOTE: Check the wiring color before disconnecting the wiring.
| Pin | Function | Color |
|---|---|---|
| 3 | Key interlock switch (+) | Brown |
| 4 | Key interlock switch (-) | Brown |
| 5 | Manual mode "down" | Red/Black |
| 6 | Manual mode "select" | Red |
| 7 | Manual mode "up" | White |
| 9 | Ground (IG) | Black |
| 10 | Shift lock solenoid (-) | White/Black |
| 11 | Shift lock solenoid (+) | Black/Yellow |