LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Sorento EX, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Brake System) >> Front Disc Brake >> Repair Procedures >> Inspection >> Front Brake Disc Runout Check

Front Brake Disc Runout Check

WARNING: This page is about a different car, the 2019 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a dial gauge about 5 mm (0.2 in.) from the outer circumference of the brake disc, and measure the runout of the disc.

    Brake disc runout 

    Limit: 0.025 mm (0.00098 in.) or less (new one)

    G12858739Courtesy of KIA MOTORS AMERICA, INC.
  2. If the runout of the brake disc exceeds the specified limit, replace the disc, and then measure the runout again.
  3. If the runout does not exceed the specified limit, install the brake disc after turning it 180° and then check the runout of the brake disc again.
  4. If the runout cannot be corrected by changing the position of the brake disc, replace the brake disc.
scientia non olet · About LEMON Manuals