LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Sorento EX, FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 3.3L >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Release the residual pressure in fuel line.

    (Refer to the Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  2. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  3. Remove the second row seat.

    (Refer to Body - "REAR SEAT ASSEMBLY ")

  4. Remove the rear seat LH air duct (A) after loosening the mounting nuts.
    G12885739Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the seat cable bracket (A) after loosening the mounting nuts.
    G12885740Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel pump service cover (A) after loosening the mounting screws.
    G12885741Courtesy of KIA MOTORS AMERICA, INC.
  7. Disconnect the fuel feed tube quick-connector (A), fuel pressure sensor connector (B), fuel pump control module (C) and fuel tank pressure sensor (D).
    G12885742Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the fuel pump plate cover (A) by using the special service tool (B) [No.: 09310-B8100].
    G12885743Courtesy of KIA MOTORS AMERICA, INC.
  9. Remove the fuel pump (A) from the fuel tank.
G12885744Courtesy of KIA MOTORS AMERICA, INC.
G12885745Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals