LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Sedona LX >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Drive Belt System >> Drive Belt >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Remove the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "ENGINE ROOM UNDER COVER ")

  2. To release the tension, turn the drive belt tensioner counterclockwise and then remove the drive belt (A).

    [MDPS] 

    Fig 1: Engine Drive Belt Routing Diagram (MDPS)
    G13043791Courtesy of KIA MOTORS AMERICA, INC.

    [HPS] 

    Fig 2: Engine Drive Belt Routing Diagram (HPS)
    G13043792Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Install the drive belt in the following order:
    Crankshaft damper pulley → A/C compressor pulley → Idler Pulley → alternator pulley → Idler Pulley → water pump pulley → drive belt auto tensioner pulley.
    Rotate the auto tensioner arm by turning the auto tensioner arm boss (A) counterclockwise using a wrench. After installing the drive belt to the auto tensioner pulley, slowly release the auto tensioner arm.
    G13043793Courtesy of KIA MOTORS AMERICA, INC.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals