Repair Procedures: Replacement
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Recover the refrigerant with a recovery/charging station.
- Disconnect the A/C pressure transducer connector (A).
- Remove the A/C pressure transducer (A).
Tightening Torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
CAUTION: Be careful not to bend the liquid & suction pipe. - To install, reverse the removal procedure.NOTE: When installing, replace it with a new O-ring.