Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.

NOTE:

Be careful not to damage the sensing element and the honey cell.

Install in the reverse order of removal.
Mass air flow sensor mounting bolt:

2.9 - 4.9 N.m (0.3 - 0.5 kgf.m, 2.2 - 3.6 lb.ft)

Mass air flow sensor clamp mounting bolt:

2.9 - 4.9 N.m (0.3 - 0.5 kgf.m, 2.2 - 3.6 lb.ft)