LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 471 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Install the component with the specified torque.
  • Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
  1. Install in the reverse order of removal.
  2. Supplement the engine coolant.

    (Refer to Engine Mechanical System - "COOLANT ")

  3. Reset the ECM adaptive values after replacing the ETC.
    G13483008Courtesy of KIA MOTORS AMERICA, INC.
    G13483009Courtesy of KIA MOTORS AMERICA, INC.
  4. Perform the ETC learning procedure.

    (Refer to ETC (Electronic Throttle Control) System - "ADJUSTMENT ")