Repair Procedures: Removal
WARNING: This page is about a different car, the 2022 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Remove the air duct (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Disconnect the boost pressure sensor connector (A).
- Remove the sensor (B) by loosening the mounting bolts.
Boost pressure sensor mounting bolt:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)
 Courtesy of KIA MOTORS AMERICA, INC.
|