Removal and Installation: Notes
WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative (-) battery terminal.
- Remove the outside rear combination lamp assembly after disconnecting the connector.
- Remove the bulb (A) after turning it in the counter clockwise direction.
[LED Type]
[Bulb Type]
- Remove the inside rear combination lamp cover.
- Disconnect the inside rear combination lamp connector (A) after removing the rear combination lamp cover.
- Remove the inside rear combination lamp assembly after loosening the nuts.
- If it is necessary to replace the bulb, remove the bulb after removing the tailgate cover.