LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Lighting System) >> High Mounted Stop Lamp >> Repair Procedures >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the spoiler assembly.

    (Refer to Body - "REAR SPOILER ")

  3. Remove the high mounted stop lamp assembly after loosening the mounting screws
    CAUTION:

    When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

    G12607377Courtesy of HYUNDAI MOTOR AMERICA
    G12607378Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals