LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 308 (Transfer Assembly) >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the oil filler plug (A).

    [Gasoline 1.6] 

    G12605703Courtesy of HYUNDAI MOTOR AMERICA

    [Gasoline 2.0] 

    G12605704Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the oil level.
  4. Oil level must be up to fill the hole, if not, add oil until it runs over.

    [Gasoline 1.6] 

    G12605705Courtesy of HYUNDAI MOTOR AMERICA

    [Gasoline 2.0] 

    G12605706Courtesy of HYUNDAI MOTOR AMERICA
  5. Install the oil filler plug with a new gasket.

    Tightening Torque: 

    39.2 - 58.8 N.m (4.0 - 6.0 kgf.m, 28.9 - 43.4 lb-ft)

  6. Install the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")