LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Engine Control System - 2.0L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove the battery.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Disconnect the engine coolant temperature sensor connector (A).
    G13483022Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the engine coolant temperature sensor (A).

    Tightening torque  :

    29.4 - 39.2 N.m (3.0 - 4.0 kgf.m, 21.7 - 28.9 lb.ft)

    G13483023Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: Note that engine coolant may be flowed out from the engine coolant temperature control assembly when removing the sensor.
scientia non olet · About LEMON Manuals