LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Abs) (Except HEV) >> Troubleshooting >> Standard Flow Of Diagnostic Troubleshooting >> Inspection Procedures >> Problem Verification

Problem Verification

  1. Disconnect the connector from the ABS control module and turn the ignition switch ON.
  2. Does the ABS warning lamp light up?

    YES 

    • Inspect again after replacing the ABS HECU.

    NO 

    • Check the power source for the ABS warning lamp.
scientia non olet · About LEMON Manuals