Washer Fluid Level Sensor Switch

WARNING: This page is about a different car, the 2019 Kia Niro EV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the engine room under cover.
(Refer to Traction Motor System - "UNDER COVER ")
Remove the front wheel guard [RH].
(Refer to Body - "FRONT WHEEL GUARD ")
Drain the washer fluid to less than 650 cc.
Remove the washer fluid level sensor switch (B) after disconnecting the connector (A).

Courtesy of KIA MOTORS AMERICA, INC.