Cases Of Charging Problem
NOTE:
In case of malfunction on cell phone charging system, check the contents as below when the interference condition of smartkey signal and "OFF" status of charging indicate.
| No. | Cause | Countermeasure | Remarks |
|---|---|---|---|
| 1 | Using the cell phone that can not be charged without wire | Check if the wireless power charger has been applied | |
| 2 | Off condition of wireless charging system in USM on cluster | Change the setting to ON in USM | |
| 3 | Door opened (interference of smartkey signal) | Door or trunk/tail gate closed | |
| 4 | Cell phone has been out of center position on charger pad | Change the position of cell phone onto the center of wireless power charger pad | |
| 5 | Thick accessary cover | Get rid of the accessary cover and charge. | |
| 6 | Long term using of game, navigation and etc (wireless charging system would be stopped cause of the temperature of cell phone receiver gets higher.) | Turn off the application which has been used | |
| 7 | Main board of cell phone has been broken | Replace the main board of cell phone | Compare condition of charging to the other cell phone |
| 8 | Metallic object on the wireless power charge pad (coins, clip, etc.) | Get rid of the metallic object, then try charging. |
CAUTION:
If the cell phone can not be charged cause of charging trouble cases as mentioned above, solve the problem followed by countermeasure. (not allowed to change parts)