LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 6) >> DTC P0200-00: Injector Circuit/Short >> Component Inspection >> Check Injector

Check Injector

  1. Ignition "OFF".
  2. Disconnect Injector connector.
  3. Measure resistance between Pin No. 1 (high) terminal and Pin No. 2 (low) terminal of the related Injector. (component side)

    Specification:  1.18 to 1.31 [20°C(68°F)]

  4. Is the measured resistance within specification?

    YES 

    NO 

    • Carefully re-do this troubleshooting guide steps.
    • If no problems were found with the circuits or connectors, replace the related Injector and go to "VERIFICATION OF REPAIR " procedure.
scientia non olet · About LEMON Manuals