| Shock when shifting to and from D/R Motor run-up when shifting to and from D/R |
Faulty position sensor "N" setting |
Use the "N" setting jig and adjust the "N" setting. |
| (Refer to "Automatic Transaxle System - POSITION SENSOR ") |
| Faulty oil pressure in the valve body |
Replace valve body assembly or inspect/replace transaxle assembly |
| Faulty engine start Current gear not indicated in the Cluster Warning Lamp ON Engine stall while stopped Creeping not possible Auto parking release disabled |
Faulty CAN terminating resistance/circuit |
Check TCM/battery management system module. |
| Check TCM wiring connector connection. |
| Faulty position sensor circuit fuse |
Check fuse and junction box terminal, and repair. |
| Faulty position sensor wiring connector |
Check for foreign substance in the wiring connector, and check for gap on the terminal. |
| Check sealing on unused pin, and check for corrosion on the terminal. |
| Faulty reverse lamp circuit |
Check reverse lamp ground, and reassemble if necessary. |
| Faulty position sensor wiring ground |
Check wiring ground, and reassemble if necessary. |
| Position sensor faulty code |
Inspect in accordance with the inspection flow, then replace position sensor if necessary. |