LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Cadenza Technology >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (4 Of 6) >> DTC P0462-00: Fuel Level Sensor 'A' Circuit Low Input >> Component Inspection >> Check FLS Resistance

Check FLS Resistance

  1. Refer to "FUEL SENDER " and remove Fuel Pump (Fuel Sender) Unit.
  2. Move the Fuel Sender by hands and monitor "Fuel Level" parameter in "Current Data" with KDS.
  3. Is the value changes as fuel sender is moved?

    Specification:  Refer to Figure 1 below

    G00591078Courtesy of KIA MOTORS AMERICA, INC.

    Fig.) Engine Idle after Warm Up

  4. Are the parameters displayed correctly?

    YES 

    NO 

    • If no problems were found with the circuits or connectors, replace the Fuel Pump (Fuel Sender) and go to "VERIFICATION OF REPAIR " procedure.
scientia non olet · About LEMON Manuals