| DTC Strategy |
- Check the installation angle or perform the calibration
|
- BCW installation angle failure
- Control module missing calibration
|
| Enable Condition |
- Ignition "ON".
- Normal input voltage condition (C110117/C110216 DTC not generated)
|
| Threshold Value |
- When sensor installation angle is out of specification range (-5 to 5 degree)
- When sensor installation angle is out of specification range (-4 to 4 degree) in the factory
|
| Detecting Time |
|
| Symptom |
|
| Clear Condition |
- Be cleared with diagnostic equipment
|
| Fail Safe |
- BCW mirror indicator off
- BCW switch LED off
|