Repair Procedures: Installation

Install in the reverse order of removal.
NOTE:
- When installing, set control shaft lever to neutral position.
  
  Fig 1: Setting Control Shaft Lever To Neutral Position
  Courtesy of KIA MOTORS AMERICA, INC.
- When installing, apply the sealant as displayed in the image.
  Specified Sealant: Anaerobic adhesives (For flange)
  
  Fig 2: Applying Sealant On Flange
  Courtesy of KIA MOTORS AMERICA, INC.
After installing, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of shift lever.