Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the clutch pedal mounting nuts (A).

Fig 1: Locating Clutch Pedal Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Separate the push rod (C) after remove the pin (A) and washer (B).

Fig 2: Locating Push Rod, Pin And Washer
Courtesy of KIA MOTORS AMERICA, INC.
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery and battery tray.
G 1.6 GDI (Refer to Engine Electrical System - "BATTERY ")
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
CAUTION:
- Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.

Fig 3: Locating Clutch Tube And Reservoir Hose

Courtesy of KIA MOTORS AMERICA, INC.