OCS Ecu
WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.
- Install the occupant classification system unit on the Front seat track assembly.
- Connect the occupant classification system unit connector.
- Install the front passenger seat assembly.
(Refer to Body - "FRONT SEAT ASSEMBLY ")
- Reconnect the battery negative cable.
- After installing the occupant classification system, confirm proper system operation.
NOTE:
- Turn the ignition switch ON the SRS indicator should be turned on for about six seconds and then go off.
- Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the OCS does not require suppression and the passenger airbag is enabled.
- Be sure to perform OCS zeroing with GDS after replacing OCS equipped seat cushion.