Repair Procedures: Replacement

WARNING: This page is about a different car, the 2018 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the hood lower latch connector (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the hood latch wiring (A).

Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolts and remove the hood lower latch assembly (A).

Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the hood latch cable (A) and remove the hood latch (B).

Courtesy of HYUNDAI MOTOR AMERICA
To install, reverse removal procedure.
Information
- Make sure the hood latch release cable is connected properly.
- Make sure the hood locks/unlocks and opens/closes properly.
- Adjust the latch alignment.
- Replace any damaged clips (or retainers or fasteners)