LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sorento S, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System - 3.3L >> Shift Cable >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Move the shift lever to "N" range.
  2. Remove the air duct and the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  4. Loosen the nut (A) and then remove the shift cable (B) from the bracket (C).

    Tightening torque: 

    7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

    G12885880Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the knob & boots (A) by pulling the direction of arrow after removing the boots from the console upper cover.
    G12885881Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ")

  7. Remove the shift cable (A) after removing a snap pin.
    G12885882Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the shift cable retainer (A) after loosening the nuts (B). Then, remove the shift cable by pulling it toward the vehicle interior.
G12885883Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals