LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sorento S, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]

[Bank 1/Intake]

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner assembly.

    (Engine Mechanical System - "AIR CLEANER ")

  3. Remove the engine hanger (A) after loosening the mounting bolt.
    G12885596Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the camshaft position sensor connector (A).
  5. Remove the mounting bolt (B), and then vertically remove the sensor from the cylinder head.

    Crankshaft Position Sensor mounting bolt: 

    7.8 - 8.8 N.m (0.8 - 0.9 kgf.m, 5.8 - 6.5 lb.ft)

G12885597Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals