LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 3.3L) >> Knock Sensor (KS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Install the component to the specified torque.
  • Note that internal damage may occur if the component drops. In this case, use it after inspecting.
  • The sensor connector must be installed parallel to the engine.
  1. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals