LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Sedona SX >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System And Alignment >> Rear Stabilizer Bar >> Repair Procedures >> Removal And Installation

Removal And Installation

  1. Remove the rear wheel and tire (A) from rear hub.

    Tightening torque: 

    107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb.ft)

    CAUTION: Be careful not to damage the hub bolts when removing the rear wheel and tire (A).
    G13044847Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the rear stabilizer bar (A).
    1. Loosen the nut (D).
    2. Loosen the bolt (B) and nut (C).
    3. Remove the stabilizer bar (A).
    G13044848Courtesy of KIA MOTORS AMERICA, INC.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals