Repair Procedures: Removal

WARNING: This page is about a different car, the 2020 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Move the shift lever to "N" range.
Disconnect the battery negative (-) cable.
Remove the knob (A) and boots (B) by pulling them in the direction of the arrow after separating the boots from the console upper cover.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the floor console assembly.
(Refer to Body - "FLOOR CONSOLE ASSEMBLY ")
Disconnect the main connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the wiring from the shift lever.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift cable (A) from the shift lever.

Courtesy of KIA MOTORS AMERICA, INC.
Remove the shift lever assembly (A).
Tightening torque:

8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.