Repair Procedures: Replacement
WARNING: This page is about a different variant/trim than selected.
NOTE:
It is not recommended to replace the VFS type solenoid valve on its own. If a VFS type solenoid valve needs to be replaced, the valve body assembly should be replaced and the oil pressure should be adjusted.
As oil pressure adjustment is impossible without separate equipment, and shift shock or delay may occur, the valve body assembly needs to be replaced in case of failure of VFS type solenoid valve.
As oil pressure adjustment is impossible without separate equipment, and shift shock or delay may occur, the valve body assembly needs to be replaced in case of failure of VFS type solenoid valve.
- Replace the valve body assembly.
(Refer to Hydraulic System - "VALVE BODY ")