LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 291 (Surround View Monitoring (SVM) System (PHEV)) >> Pantoscopic Camera >> Repair Procedures >> Installation >> Rear Pantoscopic Camera

Rear Pantoscopic Camera

WARNING: This page is about a different variant/trim than selected.
  1. Install the rear pantoscopic camera and then connect the connector.
  2. Install the trunk lid key holder.
  3. Install the trunk lid trim.
  4. Connect the negative (-) battery terminal.

    Information 

    Be sure to perform the compensation calibration after replacing the camera.

    (Refer to Surround View Monitoring (SVM) System - "REPAIR PROCEDURES ")

scientia non olet · About LEMON Manuals