LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 249 (Occupant Classification System Diagnosis (PHEV)) >> DTC B1767-2F: OCS Algo Cut Off >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect KDS to Data Link Connector (DLC), and monitor "Diagnostic Trouble Codes (DTC)".
  2. Clear all DTCs in the system with KDS.
  3. Operate system or vehicle within DTC detecting condition in DTC Detecting Condition chart.
  4. Monitor "Diagnostic Trouble Codes (DTC)" with KDS and verify that any DTC is stored.
  5. Are any DTCs stored in the system?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • Problem is corrected and the system operation performs to specification at this time.
scientia non olet · About LEMON Manuals