LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 221 (Engine Control System (PHEV)) >> Injector >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the injector connector.
  3. Measure resistance between the injector terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  1.5 Ω [20°C (68°F)]

scientia non olet · About LEMON Manuals