LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 221 (Engine Control System (PHEV)) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  • Apply the engine coolant to the O-ring.
  • Insert the sensor in the installation hole and be careful not to damage.
  1. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals