LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 221 (Engine Control System (PHEV)) >> Manifold Absolute Pressure Sensor (MAPS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the KDS on the Data Link Connector (DLC).
  2. Measure the output voltage of the MAPS at idle and IG ON.
    Pressure [kPa (kgf/cm2 , psi)] Output Voltage (V) [Vref = 5V]
    20.0 (0.20, 2.9) 0.79
    46.7 (0.47, 6.77) 1.84
    101.3 (1.03, 14.7) 4.0
scientia non olet · About LEMON Manuals