LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 221 (Engine Control System (PHEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses.
  5. Remove the installation bolts (B), and then remove the ETC module from the engine.
    G13155706Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals