Repair Procedures: Removal
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disassembly the steering wheel assembly.
(Refer to Steering System - "STEERING WHEEL ")
- Remove the paddle shift switch (A) after loosening the mounting screws.
[LH]
[RH]
- Disconnect the paddle shift switch connector (A).
[LH]
[RH]
- Remove the steering back cover (A).
- Disconnect the steering wheel remote connector (A).
[LH]
[RH]
- Remove the steering wheel remote control assembly (A) after loosening the mounting screws.
- Remove the ASCC switch (A) after loosening the mounting screws.