Description & Operation: Description
WARNING: This page is about a different variant/trim than selected.
- Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH) and two rear SIS which are installed in the rear pillar (LH and RH).
- Pressure Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location.
- Side Impact Sensor is also called A-SIS because it detects acceleration.
- SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred.