LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 237 (Supplemental Restraint System Control Module (SRSCM) And Sensors (PHEV)) >> SRS Control Module (SRSCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the Ignition from the vehicle.
  2. Disconnect the battery negative terminal and wait for at least thirty seconds before beginning work.
  3. Remove the floor console.

    (Refer to Body (Interior and Exterior) - "FLOOR CONSOLE ")

  4. Disconnect the Supplemental Restraint System Control Module (SRSCM) connector (A).
    G13156730Courtesy of KIA MOTORS AMERICA, INC.
  5. Loosen the bolt (A) and nuts (B) and then remove the Supplemental Restraint System Control Module (SRSCM).
    G13156731Courtesy of KIA MOTORS AMERICA, INC.
    CAUTION: You must remove or install SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment.
scientia non olet · About LEMON Manuals