Repair Procedures: Removal
WARNING: This page is about a different car, the 2017 Kia Optima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery (-) terminal.
- Disconnect the mass air flow sensor connector (A) and the installation clamp.
- Remove the mass air flow sensor (B).
Mass air flow sensor mounting bolt:
2.9 - 4.9 N.m (0.3 - 0.5 kgf.m, 2.2 - 3.6 lb.ft)
Mass air flow sensor clamp mounting bolt:
2.9 - 4.9 N.m (0.3 - 0.5 kgf.m, 2.2 - 3.6 lb.ft)