LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Optima EX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 6) (PHEV) >> DTC P0462-00: Fuel Level Sensor 'A' Circuit Low Input >> Wiring Inspection >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF".
  2. Refer to FUEL PUMP CONTROL MODULE (FPCM) and disconnect Fuel Control Module connector.
  3. Ignition "ON".
  4. Measure voltage between Pin No. 6 (Signal) terminal of Fuel Control Module harness connector and chassis ground.

    Specification:  B+

  5. Is measured value within specification?

    YES 

    NO 

    • Repair open or short in signal circuit of Fuel Control Module and then go to "VERIFICATION OF REPAIR " procedure.