LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2019 >> Niro Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Supplemental Restraint System Control Module (SRSCM) And Sensors (PHEV)) >> SRS Control Module (SRSCM) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2018 Hyundai Ioniq. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console.

    (Refer to Body - "FLOOR CONSOLE ASSEMBLY ")

  4. Remove the center console duct (A) after loosening the mounting nut.
    G12728009Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the SRSCM connectors.
    G12728010Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the SRSCM (A) after loosening the mounting nuts.
    G12728011Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals